##
### Online Test Series Schedule for GATE 2017

Branch: Civil Engineering

Branch: Civil Engineering

Test Name | Description |
---|---|

Chapter-wise Tests Total: 20 tests |
Commence from 10 2016 onwards^{th} June |

Subject-wise Grand Tests Total: 40 tests |
Commence from 09 2016 onwards^{th} August |

Full Length Mock GATE Total: 12 tests |
Commence from 24 2016 onwards^{th} November |

### Chapter-wise Tests

#### (Each test carries 25 marks and 45 minutes duration.Test consists of 5 one mark questions and 10 two mark questions)

**Note: First letter in subject code refers to GATE exam**

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GMC-1 |
System of forces, free-body diagrams, equilibrium equations; Internal forces in structures; Friction and its applications; Kinematics of point mass and rigid body; Centre of mass; Euler’s equations of motion; Impulse-momentum; Energy methods; Principles of virtual work. | Engineering MechanicsTest code: GMC |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GSM-1 |
Simple stress and strain relationships, Complex Stresses and Strains, Bending moment and shear force in statically determinate beams; Deflections & Slopes, buckling ofcolumn, combined and direct bending stresses | Strength of Materials(or) Solid Mechanics Test code: GSM |

GSM-2 |
Simple bending theory, flexural and shear stresses, shear centre; Uniform torsion, Moment of Inertia, Shear Centre, Theories of Failures. |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GSA-1 |
Statically determinate and indeterminate structures by force/ energy methods;Method of superposition; Analysis of trusses, Arches, cables. | Structural AnalysisTest code: GSA |

GSA-2 |
Beams, and frames; Displacement methods: Slope deflection and moment distribution methods; Influence lines; Stiffness and flexibility methods of structural analysis. |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GCM-1 |
Construction materials: Construction Materials: Structural steel – composition, material properties and behaviour; Concrete – constituents, mix design, short-term and long-term properties;Bricks and mortar; Timber; Bitumen. |
ConstructionMaterials & Management Test code: GCM |

GSM-2 |
Construction Management: Types of projects, Tendering & Contracts, Rate analysis, standard specifications, Cost Estimation, Project planning and Network Analysis – PERT and CPM |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GCS-1 |
Working stress, Limit state and Ultimate load design concepts; Design of beams; Shear; Bond and development length; | Reinforced CementConcrete Test code: GCS |

GSM-2 |
Slabs, columns; Footing, Limit State of Serviceability; Prestressed concrete; Analysis of beam sections at transfer and service loads. |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GSS-1 |
Rivetted, bolted, Welded and Eccentric Connections, Tension & Compression Members, Column Bases & Column Splices | Steel StructuresTest code: GSS |

GSS-2 |
Plastic theory, Beams, Plate Girder, Gantry Girders & Roof Trusses |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GGT-1 |
Origin of soils, soil structure and fabric; Three-phase system and phase relationships, index properties; Unified and Indian standard soil classification system; Permeability – one dimensional flow, Darcy’s law; Seepage through soils – two-dimensional flow, flow nets, uplift pressure, piping; Principle of effective stress, capillarity, seepage force and quicksand condition. | GeotechnicalEngineering Test code: GGT |

GGT-2 |
Compaction in laboratory and field conditions; Onedimensional consolidation, time rate of consolidation; Mohr’s circle, stress paths, effective and total shear strength parameters, characteristics of clays and sand. Foundation Engineering: Sub-surface investigations – scope, drilling bore holes, sampling, plate load test, standard penetration and cone penetration tests; Earth pressure theories – Rankine and Coulomb; Stability of slopes – finite and infinite slopes, method of slices and Bishop’s method; Stress distribution in soils – Boussinesq’s and Westergaard’s theories, pressure bulbs; Shallow foundations – Terzaghi’s and Meyerhoff’s bearing capacity theories, effect of water table; Combined footing and raft foundation; Contact pressure; Settlement analysis in sands and clays; Deep foundations – types of piles, dynamic and static formulae, load capacity of piles in sands and clays, pile load test, negative skin friction. |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GFM-1 |
Properties of fluids, fluid statics; Forces on immersed bodies; Continuity, momentum, energy and corresponding equations; Potential flow, applications of momentum and energy equations; Flow measurement in channels and pipes; Laminar and turbulent flow; Flow in pipes, pipe networks; Concept of boundary layer and its growth. | Fluid MechanicsTest code: GFM |

GFM-2 |
Dimensional analysis and hydraulic similitude; Kinematics of flow, velocity triangles; Basics of hydraulic machines, specific speed of pumps and turbines; Channel Hydraulics – Energy-depth relationships, specific energy, critical flow, slope profile, hydraulic jump, uniform flow and gradually varied flow |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GHI-1 |
Hydrologic cycle, precipitation, evaporation, evapo-transpiration, watershed, infiltration, unit hydrographs, hydrograph analysis, flood estimation and routing, reservoir capacity, reservoir and channel routing, surface run-off models, ground water hydrology – steady state well hydraulics and aquifers; Application of Darcy’s law. | Hydrology &Irrigation Test code: GHI |

GHI-2 |
Duty, delta, estimation of evapo-transpiration; Crop water requirements; Design of lined and unlined canals, head works, gravity dams an spillways; Design of weirs on permeable foundation; Types of irrigation systems, irrigation methods; Water logging and drainage; Canal regulatory works, cross-drainage structures, outlets and escapes. |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GEE-1 |
Quality standards, basic unit processes and operations for water treatment. Drinking water standards, water requirements, basic unit operations and unit processes for surface water treatment, distribution of water. | Environmentalengineering Test code: GEE |

GEE-2 |
Sewage and sewerage treatment, quantity and characteristics of wastewater. Primary, secondary and tertiary treatment of wastewater, effluent discharge standards. Domestic wastewater treatment, quantity of characteristics of domestic wastewater, primary and secondary treatment. Unit operations and unit processes of domestic wastewater, sludge disposal.Air Pollution: Types of pollutants, their sources and impacts, air pollution meteorology, air pollution control, air quality standards and limits.Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal).Noise Pollution: Impacts of noise, permissible limits of noise pollution,measurement of noise and control of noise pollution. |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GTE-1 |
Highway alignment and engineering surveys; Geometric design of highways – cross-sectional elements, sight distances, horizontal and vertical alignments; Highway materials – desirable properties and quality control tests; Design of bituminous paving mixes. Geometric design of railway track; Airport runway length, taxiway and exit taxiway design. |
TransportationEngineering Test code: GTE |

GTE-2 |
Design factors for flexible and rigid pavements; Design of flexible pavement using IRC: 37-2012; Design of rigid pavements using IRC: 58-2011; Distresses in concrete pavements. Traffic Engineering: Traffic studies on flow, speed, travel time – delay and O-D study, PCU, peak hour factor, parking study, accident study and analysis, statistical analysis of traffic data; Microscopic and macroscopic parameters of traffic flow, fundamental relationships; Control devices, signal design by Webster’s method; Types of intersections and channelization . Highway capacity and level of service of rural highways and urban roads. |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GGE-1 |
Errors and their adjustment; Maps – scale, coordinate system; Distance and angle measurement – Levelling and trigonometric levelling; Traversing survey; Contours; Areas and volumes. | Geomatics Engg.(Surveying) Test code: GGE |

GGE-2 |
Triangulation survey; Total station; Horizontal and vertical curves. Photogrammetry – scale, flying height; Remote sensing – basics, platform and sensors, visual image interpretation; Basics of Geographical information system (GIS) and Geographical Positioning system (GPS). |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GEM-1 |
Linear Algebra: Matrix algebra; Systems of linear equations; Eigen values and Eigen vectors.Calculus: Functions of single variable; Limit, continuity and differentiability; Mean value theorems, local maxima and minima, Taylor and Maclaurin series; Evaluation of definite and indefinite integrals, application of definite integral to obtain area and volume; Partial derivatives; Total derivative; Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems.Ordinary Differential Equation (ODE): First order (linear and non-linear) equations; higher order linear equations with constant coefficients; Euler-Cauchy equations; Laplace transform and its application in solving linear ODEs; initial and boundary value problems.Partial Differential Equation (PDE): Fourier series; separation of variables; solutions of onedimensional diffusion equation; first and second order one-dimensional wave equation and two-dimensional Laplace equation. |
EngineeringMathematics Test code: GEM |

GEM-2 |
Probability and Statistics: Definitions of probability and sampling theorems; Conditional probability; Discrete Random variables: Poisson and Binomial distributions; Continuous random variables: normal and exponential distributions; Descriptive statistics – Mean, median, mode and standard deviation; Hypothesis testing.Numerical Methods: Accuracy and precision; error analysis. Numerical solutions of linear and non-linear algebraic equations; Least square approximation, Newton’s and Lagrange polynomials, numerical differentiation, Integration by trapezoidal and Simpson’s rule, single and multi-step methods for first order differential equations. |

TEST Code | Topic/Chapter | Subject & Code |
---|---|---|

GVA |
English grammar, sentence completion, verbal analogies, word groups, instructions, critical reasoning and verbal deduction. | General AptitudeTest code: GGA |

GNA |
Numerical computation, numerical estimation, numerical reasoning and data interpretation. |

### Chapter-wise Tests

#### (Each test carries 25 marks and 45 minutes duration.)

#### (Test consists of 5 one mark questions and 10 two mark questions)

Test No | Test codes | Date of Available |

CE-01 | GMC –1 | 10^{th}June 2016 |

CE-02 | GSM – 1 | 13^{th}June 2016 |

CE-03 | GSM – 2 | 16^{th}June 2016 |

CE-04 | GFM – 1 | 19^{th}June 2016 |

CE-05 | GFM – 2 | 22^{nd}June 2016 |

CE-06 | GGT – 1 | 25^{th}June 2016 |

CE-07 | GGT – 2 | 28^{th}June 2016 |

CE-08 | GCS – 1 & GSS –1 | 01^{st}July 2016 |

CE-09 | GCS – 2 & GSS –2 | 04^{th}July 2016 |

CE-10 | GSA – 1 | 07^{th}July 2016 |

CE-11 | GSA – 2 | 10^{th}July 2016 |

CE-12 | GHI – 1 | 13^{th}July 2016 |

CE-13 | GHI – 2 | 16^{th}July 2016 |

CE-14 | GEE – 1 | 19^{th}July 2016 |

CE-15 | GEE –2 | 22^{nd}July 2016 |

CE-16 | GTE – 1 & GGE–1 | 25^{th}July 2016 |

CE-17 | GTE–2 & GGE –2 | 28^{th}July 2016 |

CE-18 | GCM – 1 &GCM –2 | 31^{st}July 2016 |

CE-19 | GEM – 1 & GVA | 02^{nd}Aug 2016 |

CE-20 | GEM – 2 & GNA | 05^{th}Aug 2016 |

### Subject-wise Grand Tests- 1^{st} Series

#### (Each test carries 50 marks and 90 minutes duration.Test consists of 10 one mark questions and 20 two mark questions)

Commences from 9^{th} August, 2016 onwards, the detailed test schedule is as follows:

Test No | Test Codes | Date of Available |
---|---|---|

CE -21 | GHI | 09^{th}Aug 2016 |

CE -22 | GSA | 12^{th}Aug 2016 |

CE -23 | GCM | 15^{th}Aug 2016 |

CE -24 | GMC & GSM | 18^{th}Aug 2016 |

CE -25 | GGT | 21^{st}Aug 2016 |

CE -26 | GFM | 24^{th}Aug 2016 |

CE -27 | GCS & GSS | 27^{th}Aug 2016 |

CE -28 | GEE | 30^{th}Aug 2016 |

CE -29 | GTE | 02^{nd}Sep 2016 |

CE-30 | GGE | 05^{th}Sep 2016 |

CE -31 | GEM | 08^{th}Sep 2016 |

CE -32 | GGA | 11^{th}Sep 2016 |

### Subject-wise Grand Tests- 2^{nd} Series

#### (Each test carries 50 marks and 90 minutes duration.Test consists of 10 one mark questions and 20 two mark questions)

Commences from 14^{th} September, 2016 onwards, the detailed test schedule is as follows:

Test No | Test Codes | Date of Available |
---|---|---|

CE -33 | GHI | 14^{th}Sep 2016 |

CE -34 | GCM | 16^{th}Sep 2016 |

CE -35 | GMC & GSM | 18^{th}Sep 2016 |

CE -36 | GCS & GSS | 20^{th}Sep 2016 |

CE -37 | GFM | 22^{nd}Sep 2016 |

CE -38 | GGT | 24^{th}Sep 2016 |

CE -39 | GSA | 26^{th}Sep 2016 |

CE -40 | GEE | 28^{th}Sep 2016 |

CE -41 | GTE | 30^{th}Sep 2016 |

CE-42 | GGE | 02^{nd}Oct 2016 |

CE -43 | GEM | 04^{th}Oct 2016 |

CE -44 | GGA | 06^{th}Oct 2016 |

### Subject-wise Grand Tests – 3^{rd} Series

#### (Each test carries 50 marks and 90 minutes duration.Test consists of 10 one mark questions and 20 two mark questions)

Commences from 9^{th} October, 2016 onwards, the detailed test schedule is as follows:

Test No | Test Codes | Date of Available |
---|---|---|

CE -45 | GMC, GSM, GSA | 09^{th}Oct 2016 |

CE -46 | GGT, GFM | 12^{th}Oct 2016 |

CE -47 | GCM, GCS, GSS | 15^{th}Oct 2016 |

CE -48 | GHI, GEE | 18^{th}Oct 2016 |

CE -49 | GTE, GGE | 21^{st}Oct 2016 |

CE -50 | GEM, GGA | 23^{rd}Oct 2016 |

Test No | Test Codes | Date of Available |
---|---|---|

CE -51 | GSM, GCS | 27^{th}Oct 2016 |

CE -52 | GMC, GSS, GTE | 29^{th}Oct 2016 |

CE -53 | GCM, GGT, GHI | 31^{st}Oct 2016 |

CE -54 | GSA, GFM | 02^{nd}Nov 2016 |

CE -55 | GEE, GGE | 04^{th}Nov 2016 |

CE -56 | GEM, GGA | 05^{th}Nov 2016 |

Test No | Test Codes | Date of Available |
---|---|---|

CE -57 | GCM, GHI, GTE, GFM | 08^{th}Nov 2016 |

CE -58 | GEE, GSM, GMC, GSS | 10^{th}Nov 2016 |

CE -59 | GGT, GSA, GCS, GGE | 12^{th}Nov 2016 |

CE -60 | GEM, GGA | 13^{th}Nov 2016 |

### Civil Engineering

### Full Length Mock GATE (Tentative Schedule)

#### (Each test carries 100 marks and 3 hours duration As per GATE Pattern)

Test No | Test Codes | Date of Available |
---|---|---|

CE-61 | Mock – 1 | 24^{th}Nov 2016 |

CE-62 | Mock – 2 | 30^{th}Nov 2016 |

CE-63 | Mock – 3 | 06^{th}Dec 2016 |

CE-64 | Mock – 4 | 12^{th}Dec 2016 |

CE-65 | Mock – 5 | 18^{th}Dec 2016 |

CE-66 | Mock – 6 | 24^{th}Dec 2016 |

CE-67 | Mock – 7 | 29^{th}Dec 2016 |

CE-68 | Mock – 8 | 04^{th}Jan 2016 |

CE-69 | Mock – 9 | 09^{th}Jan 2017 |

CE-70 | Mock – 10 | 14^{th}Jan 2017 |

CE-71 | Mock – 11 | 19^{th}Jan 2017 |

CE-72 | Mock – 12 | 24^{th}Jan 2017 |